Install INtime Distributed
This tutorial assumes you already have INtime with a dev license on a Windows PC
eRMP Requires an INtime distributed licence to run.
- 1.Navigate to C:\Program Files (x86)\INtime\rtos
2. Right click create_installstick.bat and run as administrator
3. In the terminal that appears enter the drive letter of your USB stick followed by a colon
4. Once the program successfully script completes you should set the renamed drive as follows.
5. Insert the USB into the PC you wish to install INtime distributed on and set the BIOS to boot to the USB via UEFI
6. Configure your INtime distributed instalation
Critical steps in Bold
Keyboard Configuration0 = United States
Disk Partition and Format0 = Select the first available disk
Do you wish to repartition the drive [y/n]?y = Yes
Would you like to use the entire disk [y/n]?y = Yes
Proceed (With Disk Format) [y/n]?y = Yes
Proceed (With Software Instalation) [y/n]?y = Yes
Accept default timezone [y/n]?y = Yes (0ptoinal)
Is your BIOS clock kept in local time [y/n]?y = Yes (Optional)
Is the time correct [y/n]?n = No (Optional)
Enter mm/dd/yyyycurrentMonth/currentDay/currentYear
Is the time correct [y/n]?y = Yes
Select network interface for installation:2 = the third NIC (DO NOT SELECT 0/first NIC it will be used be EtherCAT)
Proceed [y/n]?y = Yes
Configureg Interface ielg2 DHCP [y/n]?y = Yes
Host Name :'eRMP'
Proceed [y/n]?y = Yes
Enter the IP Address of your SDK system:'xxx.xxx.xx.xx' Check your the ip address of your Windows PC using 'ipconfig -all'
Set Administrator Password Proceed [y/n]:n = No (Optional, no will result in password set as empty string)
Ready to start installation... Proceed [y/n]?y = yes
7. Allow the system to reboot
8. On the host PC run
C:\Program Files (x86)\INtime\bin\tetherserver.exe
9. Verify Connection to the eRMP
You should be able to see the eRMP node in INtimeConfigurator->NodeManagement
10. Configure your node
11. Make sure the INtime development environment for Visual Studio has been installed.
Last modified 2yr ago