Electronic Gearing

Gearing links two or more axes such that the position of the “slave” axis is a function of the position of the “master” axis.

Gearing Parameters

Check out our RapidCode topic documentation here.

  • Gearing State displays whether you have successfully geared 2 axes or not.

  • Master Axis Number represent which axis to be setup as the master.

  • Gearing Source allows you to select which source the slave will be geared to.

  • Numerator (A) & Denominator (B) define the gearing ratio between the master and slave.

  • Enable & Disable Buttons enable/disable gearing in RapidSetup.